The Lumintop Antman is a high-quality LEP flashlight torch designed for outdoor activities such as camping and hiking.
PRODUCT FEATURES Maximum brightness 650 lumens,maximum range 1695 meters; USB Type-C charging technology,with charging indication function; Tail tactical switch,light up with one touch; Neck function switch, one-touch dimming and shifting; With power display and gear memory function; Built-in inteligent temperature control system to prevent over heating during use of the flashlight and improve the comfort of use; Constant current circuit,constant brightness, Low voltage warning,when the remaining power is too low,remind the user to re-place it in time; Anti-reverse connection design to prevent the battery from being installed in reverse and causing damage to the circuit; Made of aviation aluminum AL6061-T6,the surface is treated with military grade three hard anodized anti-wear treatment;.
● Using white laser light source, the highest brightness is 460 lumens, and the longest beam range is 1100 meters ● USB Type-C charging technology with charging indication function ● Tail tactical tail press,One touch and release ● Neck function switch, one-key dimming and shifting ● With power-on power display and modememory functionBuilt-in intelligent temperature control system to prevent the flashlight from overheating during use and improve the comfort of use ● Constant current circuit, constant brightness ● Low-voltage warning, remind users to replace in time when the remaining power is too low ● Anti-reverse design to prevent the battery from being reversed and causing harm to the circuit ● Made of aviation aluminum AL6061-T6.
W4Pro TAC is the tactical version of W4Pro, It’s a LEP flashlight that throws 3712 yards. The light intensity reaches 2,882,000 candela, 568 lumens. It uses a 21700 rechargeable lithium-ion battery, uses a customized LEP light source, and then passes through the lens reflection system to form a dazzling beam. By default, the high mode is turned on, half-press Momentary or full-press to lock and continue to work, even if Momentary is frequently used, it will not change modes, and it is always high;The hidden mode is strobe and low，In the off state, you can half-press 3 times to turn on the strobe, and you can switch to low.W4Pro TAC has almost no spill, suitable for field search, sea rescue, long-distance indication, etc. It is specially designed for special lighting.Features: Material: Aluminum, black hard anodizedReflective system: acrylic convex lensLight source: special LEP module, wavelength 400-700nm, 6000-7000K, lifespan is about 10,000 hoursoutput:High modeStrobeLow modeLight Output568 lumensN/A186 lumensBeam Intensity2,882,000 candelaN/A1,108,000 candelaBeam Distance3,712ydN/A2,302ydRuntime1 hours 15 minutesN/A4 hoursRemarks: This test uses Weltool UB21-50 5000mAh 21700 rechargeable battery test, test environment: below 25 degrees Celsius, continuous lighting outdoors, (ambient temperature will affect runtime)Battery: Use 1 21700 Li-ion rechargeable battery (included)Switch: Tail button forward switch, 50,000 pressing lifeHigh-efficiency drive circuit, no noise and no flickerTemperature control protection: When the temperature of the flashlight is too high, the flashlight will automatically reduce the brightness to prevent overheatingwith polarity protectionWith low voltage prompt functionWith battery over-discharge protection304# stainless steel bezel, double-coated tempered glass lensPassed the 1 meter drop testDouble O-ring waterproof, the protection level reaches IP67Each flashlight has a unique serial numberDimensions (±0.5mm): (Head diameter) 60.5mm, (Body diameter) 27mm, (Length) 198mmWeight: 336±2g (without battery)Included: UB21-50 lithium-ion battery, Type-C charging data cable, O-ring, stainless steel pocket clip
Light source: special LEP module, wavelength 400-700nm, lifespan about 10,000 hours. Each flashlight has a unique serial number. DISTANCE 1205m 536m. Switch: Tail tactical switch, 50,000 press life. Reflective system: Acrylic lens.
The flashlight has two modes, high and low, and has strobe function. This light source passed with IEC 62471 Exempt and IEC 60825 Class 1. Special LEP module, wavelength 400-700nm, lifespan about 10,000 hours.
The Weltool W4Pro is an upgraded version of the W4, a LEP flashlight with a throw distance of 3712yd! The light intensity reaches 2,882,000 candela, and the luminous flux is 568 lumens. It uses a 21700 rechargeable lithium-ion battery, uses a customized LEP light source, and then passes through the lens reflection system to form a dazzling beam. Two brightness modes, high and low, are easy to operate.In the off state, it can be turned on instantly by simply pressing the switch. W4Pro also has a hidden strobe mode for emergency use. W4Pro has almost no spill, suitable for field search, sea rescue, long-distance indication, etc. It is specially designed for special lighting.Features: Material: Aluminum, black hard anodizedReflective system: acrylic convex lensBeam angle: 1.8°Light source: special LEP module, wavelength 400-700nm, lifespan is about 10,000 hoursoutput:Low modeHigh modeLight Output210 lumens568 lumensBeam Intensity1,108,000 candela2,882,000 candelaBeam Distance2302yd3712ydRuntime4 hours 30 minutes1 hourRemarks: This test uses Weltool UB21-50 5000mAh 21700 rechargeable battery test, test environment: below 25 degrees Celsius, continuous lighting outdoors, (ambient temperature will affect runtime)Battery: Use 1 21700 Li-ion rechargeable battery (included)Switch: Tail button forward switch, 50,000 pressing lifeHigh-efficiency drive circuit, no noise and no flickerTemperature control protection: When the temperature of the flashlight is too high, the flashlight will automatically reduce the brightness to prevent overheatingwith polarity protectionWith low voltage prompt functionWith battery over-discharge protection304# stainless steel bezel, double-coated tempered glass lensPassed the 1 meter drop testDouble O-ring waterproof, the protection level reaches IP67Each flashlight has a unique serial numberDimensions (±0.5mm): (Head diameter) 60.5mm, (Body diameter) 27mm, (Length) 198mmWeight: 336±2g (without battery)Included: UB21-50 lithium-ion battery, Type-C charging data cable, O-ring, stainless steel pocket clip
W7’s LEP light source complies with IEC 62471 Exempt and IEC 60825 Class 1. The default power-on mode is high mode, hiding the strobe and low. W7’s spill allows users to effectively maintain dark adaptation and have better situational awareness, and the hot spot can be thrown farther, suitable for rescue, tactics, search and other purposes.
Description: The T10 is a super long-throwing LED hunting light specially designed for outdoor hunting. It is available in 2 types: T10-HG (green light) and T10-HR (red light) for different preys. The T10 adopts Projection Compact green LED (about 550nm) or red LED (about 620nm), which can dispense with color filter. LED of high luminous intensity with super-concentrating reflectors creates extraordinary long-range beam! T10-HR’s light intensity up to 50600cd candela! The luminous flux is up to 342 lumens and the beam distance is 450 meters! The standard 1-inch diameter body is suitable for most mounts and can be easily mounted on shotguns with optional tail remote switches. T10 has high and low modes with beacon mode which is convenient for positioning in the field. IP67 rating, it can be used in heavy rain. The unibody construction of the T10 gives it a high rate of heat dissipation and shock resistance, and the drive circuit is with high-efficiency temperature control protection function, complementing the built-in multiple tiers of protection system, including low-voltage warning, reverse polarity protection. The veteran hunters know that the light intensity of hunting lights is more important than the luminous flux. Hunters can easily find hogs, wolves, foxes or even hares which are hundreds of meters far away, thanks to the help of T10 “Devil Incarnate”. Directions:Open the tail cap by twisting counter-clockwise, insert a charged quality battery with the positive terminal towards the bezel, and tighten the tail cap by turning clockwise.The flashlight has reverse polarity protection, the light will not be damaged by batteries inserted in the wrong orientation, but it will not turn on. If this occurs, please check the battery orientation.Half press the tail switch to turn on the flashlight, loosen to turn off the flashlight. Each time the flashlight is turned on, the default setting is “LOW”.When the flashlight is off, half press the tail switch to cycle between LOW, HIGH and beacon modes. Fully press the tail switch until “click” is heard to lock the mode, and fully press again to turn off the flashlight.When the battery voltage is too low, the flashlight will flash 2 time as a warning. When the flash is given, please change to a new battery.After the first flash warning, the flashlight will operate for several minutes as a safety measure.After several minutes, the second flash warning will be given. After this warning, the flashlight will shut off automatically.Caution:Unauthorized disassembly may damage the flashlight and void the warranty.Weltool “Total Heat Dissipation” technology will dissipate the internal heat of the light during operation, it is normal to feel the flashlight body temperature rise.Please check and replace the O-ring regularly to maintain the waterproof rating.Please check and lubricate the threads regularly with professional lubricant.Clean the contact surfaces regularly to keep the flashlight normal operation. If irregular strobe or failure to turn-on occurs, the contact surfaces may be dirty and requires cleaning by using alcohol cotton swabs.Remove the battery from the flashlight during long term storage.This flashlight is not intended to be used as a diving light.Do not aim the flashlight directly at eyes. Keep out of the reach of children.
The W3Plus features a unique LEP light source with high energy density that, when reflected through its acrylic optical lens and tempered coated glass, creates a stunningly bright and focused beam. Its tail forward switch, rated for 50,000 presses, and high-efficiency drive circuit operate without noise or PWM, making it both durable and efficient.